USED DOZER
$349,000 cad
2015 CAT D6T 6 WAY BLADE N RIPPER
Enclose Cab, Heat, AC
6 WAY BLADE WITH RIPPER
RECENTLY UPGRADED UNDERCARRIAGE HEAVY DUTY (NOT SYSTEM 1)
WIRED FOR GRADE CONTROL
USED EXCAVATORS
Call For Pricing
2015 CAT 308E2CR
NET HORSEPOWER
66HP @ 2400 rpm
OPERATING WEIGHT
8400 kg 18519 lb
Digging and Clean-up Bucket, Heat, AC, Back -Up Camera, Thumb
$139,000 cad
2020 RUBBER TIRE JCB3CX BACKHOE
NET HORSEPOWER: 74 hp
DIG DEPTH: 14 ft 2 inches
WEIGHT: 13500 lb
Cab Heat, AC, Loader has Quick Attach Buckets and Forks. Backhoe has Extend a Hoe with Weldco Beals Quick Attach and 30″ Dig Bucket.
Call For Pricing
2020 HITACHI ZAXIS 225USLC
NET POWER: 163.7 hp @ 2000 rpm
OPERATING WEIGHT: 51588.2 lb
MAX DIGGING DEPTH: 28 ft
Digging Bucket, Cab Heat, AC, Backup Camera, Aux Hydraulic Quick Attach
Call for Pricing
2021 HITACHI ZAXIS US225 – 6
NET POWER: 163.7 hp @ 2000 rpm
OPERATING WEIGHT: 51588.2 lb
MAX DIGGING DEPTH: 28 ft
48″ Digging Bucket, Cab Heat, AC, Hydraulic Pin Grabber Quick Attach. Additional Buckets available.
$219,500 cad
1 only
2021 HITACHI ZAXIS 135US
NET HORSEPOWER: 80.5 hp Measured @ 2100 rpm
OPERATING WEIGHT: 29101.1 lb
MAX DIGGING DEPTH: 18.28 ft
Cab Heat, AC, Hydraulic Pin Grabber Quick Attach, 2 Buckets, Blade, Steel Tracks
USED LOADER
$94,900 cad
2021 JD 325G LOADER
NET POWER: 74 hp
Close cab with heat, 2 speed, bucket, backup camera
Controls switchable
Hydraulic Quick Attach
USED TRUCKS
FOR RENTAL ONLY
2014 ARTICULATED DUMP TRUCK
Net Power: 367 hp
Max Torque: 1579 lb ft
Rated Payload: 62000 lb
Capacity – Heaped: 23 yd3
Capacity – Struck: 17.4 yd3
Lower Time: 8 sec
Raise Time: 12 sec
Tare weight: 53131 lb
Heated Box, Heat, AC, Automatic Transmission
FOR RENTAL ONLY
HYDREMA ROCK TRUCK
12 Metric Tons
Side and Back Dump Option
Ideal for Confined Work Space
Heated Box, Heat, AC, Automatic Transmission
COMPRESSORS
Call For Pricing
2023 KAESER 185 CFM COMPRESSORS
NET POWER: 43 hp
21 Gallon Fuel Tank with Block Heater
185 CFM
Kubota D1803CR-T Tier 4 Final Engine
USED TRACTORS
$32,500 cad
2016 NEW HOLLAND AG Workmaster 37
- Shibaura N843T-F-27 Engine
- Rear lift 1808 lb
- NET POWER: 36.2 hp
- WEIGHT: 3067 lb
$21,900 cad
2020 KUBOTA BX2380
Hydrostatic Drive, Quick Attach Material Bucket, FWD, Loader.
Call for Pricing
2023 JD 6R155
Hydrostatic Drive, Quick Attach Material Bucket, FWD, Loader.
ATTACHMENTS
$7,500 cad
2022 BRUSH RAKE 60″
Size: 60″ fits 200 size excavators
$7,950 cad
2022 BRUSH RAKE 66″
Size: 66″ fits 250 and 290 size excavators
$17,500 cad
New D6T and D6R UNDERCARRIAGE
New Rails and Pads ($17,500)
Also available are New Rollers, Idlers and Sprocket segments (Call for pricing on this additional items).
$6,525 Cad
160 Excavator DIG BUCKET – WBM Quick Attach
Size: 42″ Dig Bucket
$6,195 Cad
160 Excavator CLEAN UP BUCKET – WBM Quick Attach
Size: 54″ Clean up Bucket with Cutting Edge
$6,525 Cad
210 Excavator DIG BUCKET – WBM Quick Attach
Size: 42″ Dig Bucket
$7,930 Cad
210 Excavator CLEAN UP BUCKET – WBM Quick Attach
Size: 60″ Clean up Bucket with Cutting Edge
$4,072 Cad
210 Excavator THUMB – WBM Quick Attach
Thumb with 80mm Pins
$7,950 Cad
250/290 Excavator DIG BUCKET – WBM Quick Attach
Size: 48″ Dig Bucket
$8,450 Cad
250/290 Excavator CLEAN UP BUCKET – WBM Quick Attach
Size: 66″ Clean up Bucket with Cutting Edge
$6,750 Cad
250/290 Excavator THUMB – WBM Quick Attach
Thumb with 90mm Pins
$4,900 cad
HLA 3000 ANGLE SNOW BLADE
Size: 8 ft
Hydraulic Angle Blade
Skid Steer Quick Attach
Call For Pricing
2022 CONCRETE SCREENER MB-S14 S4 Excavator
The MB-S14 screening bucket has been specially designed for clients who require high performance in small and medium-scale sites. Compact and easy to transport, thanks to its reduced weight, it is essential in all situations requiring volumetric separation. A must in reducing volumes and optimizing the size of materials for specific uses. The screening buckets MB are equipped with baskets formed by interchangeable modular panels, available with holes of different sizes based on requirements.
9-21Ton capacity
Capacity 1.1 M3
Grid 1200 mm
Oil flow 60 L/Min
Pressure 40-150 bar
Weight 1.1 Ton
Call For Pricing
2022 CONCRETE CRUSHER MB 70.2 S4 Excavator
BF70.2 S4
15 Ton – 25 Ton Excavator class
Capacity 0.65m3
Opening Dimensions L740 H510 mm
Output 15 – 130 mm
Oil Flow 150-200l/min
Pressure 220 Bar
ACCESSORIES
• RECOMMENDED SPARE PARTS KIT • FIXED COUPLING • IRON SEPARATOR • HOUR METER • DUST SUPPRESSION KIT • 24 MONTHS WARRANTY
$3,995 cad
2022 SAFETY WORK PLATFORM
$3,695 cad
2022 FORKLIFT JIB BOOM
$5,995 cad
2022 72″ HD SKID STEER ROOT GRAPPLE
$1,595 cad
2022 HLA HD4248 FORK
Call for Pricing
2020 HLA SNOW BUCKET
We have several different sizes of snow buckets, contact for specific pricing
USED COMPACTION
Call for Pricing
COMPACTION EQUIPMENT
We have many different makes and models of compaction equipment. Everything from plate tampers, Jumping jacks all the way up to 84′ ride on packers. Contact for pricing, we’re happy to help.
$59,500 cad
2005 HAMM HD130HV 84″ Double Drum
Engine Make 2349
Engine Model BF4M2012C
Gross Power 131.5 hp
Power Measured @ 2300 rpm
Operating Weight 31305.7 lb
Fuel Capacity 47.6 gal
Drum Width 84.3 in
Vibration Frequency 1 50Hz
Nominal Amplitude – High 0.1 in
Nominal Amplitude – Low 0.1 in
Centrifugal Force – High 43613 lb
Centrifugal Force – Low 31248.5 lb
USED AERIAL
$9,900 cad
2008 GENIE GS2032
Max Working Height: 25 ft 11 in/7.90
Max Capacity: 800 lb/363 kg
Machine Width: 2 feet 8″
Machine Length: 8 ft/2.44 m
Weight: 3,574 lb/1,621 kg
USED TRAILERS
$22,500 cad
2021 PRECISION 14′ DUMP TRAILER
2x 7000# Lippert Axles, Volt flex Wiring Harness, LED Lights, Driver Side Step, A-Frame Toolbox, 16″ O/C Crossmembers, Stake pockets on Side for Side Extensions, 3 Way Tailgate, Nordic Scissor Hoist, Bucher Double Acting Power, Pack 3/16 Thick Floor, 1/8 Thick Sides, Heavy Duty 1/8 Fenders
$14,900 cad
2021 PRECISION 20′ GRAVITY TILT
2X 7000# Lippert Axles, Volt flex Wiring Harness, 2×10 Douglas Fir Decking (Treated), HD Stake pockets and Rub rail, LED Lights, Driver Side Step, 12k Sidewind Jack with Drop leg, 16″ O/C Crossmembers, Heavy Duty Fender Guard
$29,500 cad
2021 PRECISION 30′ TANDEM DUAL w/Beavertail
2X 10000# Dexter Axles, Volt flex Wiring Harness, 2×10 Douglas Fir Decking (Treated), HD Stake pockets and Rub rail, LED Lights, Driver Side Step, 50k Heavy Duty 2 speed Landing Gear, 16″ O/C Crossmembers, Heavy Duty Fender Guard
SEA-CAN
$8,750 cad
SEA-CAN 40′ CONTAINER
